Produk-produk terkait
臭氧空气质量测量仪/ o3气体相同ector for analyzing air ozone concentration
Product outline
ZA-XM-E-O3 Pump-priming Portable Ozone (O3)
Gas Detector is a continuous monitoring of a variety of single gas detection
equipment.This product is suitable for environmental monitoring including the cold
storage,industrialproduction process and other harmful gases working environment,
which can effectivelyprotect the health and safety of staff is not compromised.
Features
1.Smart probe design, calibration easy;
2.Maintenance more convenient in the future;
3.Fault, Warning, operator error, alarm will be smart tips;
4.Built-in CF calibration coefficients (VOC measurements only valid);
5.With audible alarm, visual alarm function, the status bar also displays alarm status;
6.Full-color 3.5-inch TFT screen, color LCD display and intuitive;
7.Can be both digital and curve display of gas concentration in two ways;
8.With USB communication port, you can speed 9600 bytes to communicate directly
with thecomputer;
9.With test record function, can store a month's measurement data and instrument
or computercan view the data;
10.With alarm recording function, you can record the last four times the alarm time
and type;
11.With calibration record; can record the last four times the size of the calibration
time span;
12.High-capacity lithium battery-powered, rechargeable, low batteryautomatic
shutdown;
13.Can be set high reported, underreporting, TWA, STEL, shutdown time, pump
speed, etc.;
14.Indicate way: LCD display real-time concentration, LED, buzzer alarm.
Product Technic Data
1.Testing range:0-20ppm
2. Resolution:0.001ppm
3. Power supply: Lithium battery (4.2V/3000mAh)
4. Operating Current: normal current: ≤150mA; Alarm current: ≤200mA
5. Operating environment:
Temperature: -40OC-70OC; Relative Humidity: 15%-95%, non-condensing
6. Storage environment:
Temperature: -20OC-60OC; Relative humidity: ≤90%, no condensation
7. Housing material: PC
8. Dimensions: 228*84*50.5mm
9. Installation: Handheld/Stand-in
10.重量:0.55公斤
11. Response time: T90<10S
Applications
They are widely used in petroleum chemical industry, power industry, water
treatmentindustry,the tobacco industry,pharmaceutical industry, food industry,
coal, metallurgy, municipal gas,environmental monitoring and other occasions
on-site testing.
Can be measured gas species:CH2O,TVOC,CO,H2S,NO2,NO,SO2,CL2,NH3,H2,PH3,
O3,F2,HF,HCL,HBR,C2H4O,COCL2, SIH4, CLO2, HCN, C2H4, SF6 and combustible
gases.
Other ozone monitor models
1.ZA-UV 300ozone monitor for testing ozone concentration
from ozone generator
2. ZA-S205UV ozone monitor for testing ozone concentration
from water
ORP meter for your reference
Oxygen monitor for your reference
We can supply you with below ozone generator
We can also supply you with below oxygen concentrator
Inspection before shipment
Team work
Trade terms
Payment method
Paypal,T/T,WU,etc
Packaging
1.Inner layer: plastic bag
2.Middle layer: EPE(Expand aple poly ephylene)
3.Outer Layer: carton/composite wooden cases
Prompt delivery
1.Shipping way:by sea,by air or by express(DHL,FedEx,UPS,TNT etc)
2. 3-7 days for sample order;
3. 10-30 days for mass production order.
About us
For Zeao Ozone,we can supply to you not only ozone generator,but also the high purity of Oxygen generator and UV water sterilizer.
For the oxygen,we can supply to you not only the 3LPM, 5LPM, 8LPM,10LPM PSA oxygen generator spare parts,but also the complete oxygen machine for home and industrial from 3LPM to 70LPM etc.
All of our products are favored and trusted by customers with contemporary design
(simplicity,innovation,practicability,multifunction and fashion),convenient operate,
durable and itscompetitive price.
Excellent after-sales service
1.One year warranty again the manufacture defect,offer life time consultation on problems occurred.
2.Report on the making process.
3.Marketing feedbacks tracing.
Please don't hesitate to contact with us, you are strongly expecting and welcoming to be the one of our partners in the coming day!
Technical Parameters:
| Applications | Suitable for Liquid, Gas, Liquid- Solid, Gas- Solid, Liquid- Gas Mass Measurement or volume measurement |
| Material of the Measurement Pipeline | SS 316L/ HC Hastelloy |
| Pressure | Please refer to the chart shown below. Special orders would be placed for high pressure. |
| Medium Temperature | -50℃~+150℃ (Highest Temperature: +350℃, Lowest Temperature: -300℃ could be special ordered ) |
| Environment Temperature | Sensor:-40℃~+150℃; Transmitter:-20℃~+70℃ |
| Flow Rate Measurement Accuracy | ± 0.2% ,± 0.1% optional |
| Density Measurement Accuracy | ±0.002g/cm³,±0.001g/cm³ optional |
| Repeatability | ±0.10% Flow Rate ±[½(Zero Point Stability/Flow Rate)×100]% Flow Rate |
| Output Signal | 4~20mA Load Resistance <500Ω(Instantaneous or Density optional); 0~10kHz Instantaneous Flow Rate Pulse Signal; Standard RS 485 RTU protocol |
| Explosion- Proof Symbol | EX d ib II C T5 Gb |
Micro Coriolis Mass Flow Meters:DMF-1-1; DMF-1-2
Model |
DN |
Measurement scope(kg/h) |
Work Pressure (MPa) |
Connection type (mm) |
DMF-1-1-AB |
1.5 |
0~4 |
0~32 |
Weld Joints Φ6×1.5 |
DMF-1-1-A |
3 |
0~40 |
0~32 |
Weld Joints Φ6×1.5 |
DMF-1-1-B |
6 |
0~100 |
0~25 |
Weld Joints Φ10×2 |
DMF-1-2-A |
8 |
0~200 |
0~20 |
Weld Joints Φ10×1 |
High Pressure Medium Scale Coriolis Mass Flow Meters:DMF-1-3; DMF-1-4; DMF-1-5-A
Model |
DN |
Measurement scope (kg/h) |
Work Pressure (MPa) |
Connection Type(mm) |
DMF-1-3-A |
10 |
0~500 |
0~25 |
Weld Joints Φ20×4 |
DMF-1-3-B |
15 |
0~1000 |
0~25 |
Weld Joints Φ20×3 |
DMF-1-4 |
20 |
0~3000 |
0~25 |
Weld Joints Φ20×2 |
DMF-1-5-A |
25 |
0~10000 |
0~25 |
Weld Joints Φ31×3 |
Large-scale Flow Meter: DMF-1-3; DMF-1-4; DMF-1-5; DMF-1-6
High pressure could be special ordered. (4~70MPa)
Model |
DN |
Measurement scope (t/h) |
Work Pressure (MPa) |
Connection Type(mm) |
DMF-1-3-A |
10 |
0-0.5 |
0~4 |
Flange 10 |
DMF-1-3-B |
15 |
0-1.0 |
0~4 |
Flange 15 |
DMF-1-4 |
20 |
0-3.0 |
0~4 |
Flange 20 |
DMF-1-5-A |
25 |
0-10 |
0~1.6 |
Flange 25 |
DMF-1-5-B |
40 |
0-20 |
0~1.6 |
Flange 40 |
DMF-1-6-A |
50 |
0-30 |
0~1.6 |
Flange 50 |
DMF-1-6-AB |
65 |
0-50 |
0~1.6 |
Flange 65 |
DMF-1-6-B |
80 |
0-100 |
0~1.6 |
Flange 80 |
DMF-1-6-C |
100 |
0-150 |
0~1.6 |
Flange 100 |
DMF-1-6-CD |
125 |
0-200 |
0~1.6 |
Flange 125 |
DMF-1-6-D |
150 |
0-300 |
0~1.6 |
Flange 150 |
DMF-1-6-E |
200 |
0-500 |
0~1.6 |
Flange 150 |
DMF-V-Series Coriolis Mass Flow Meters
Model |
DN |
Measurement scope(T/h) |
Work Pressure(MPa) |
Connection type (mm) |
DMF-1-3-V10 |
10 |
0-1.0 |
0~4 |
Flange DN10 |
DMF-1-3-V15 |
15 |
0-3.5 |
0~4 |
Flange DN15 |
DMF-1-4-V20 |
20 |
0-5.5 |
0~4 |
Flange DN20 |
DMF-1-5-V25 |
25 |
0-15 |
0~4 |
Flange DN25 |
DMF-1-6-V50 |
50 |
0- 40 |
0~4 |
Flange DN50 |
DMF-1-6-V80 |
80 |
0- 100 |
0~1.6 |
Flange DN80 |
DMF-1-6-V100 |
100 |
0- 150 |
0~1.6 |
Flange DN100 |
DMF-1-6-V150 |
150 |
0- 350 |
0~1.6 |
Flange DN150 |
DMF-1-6-V250 |
250 |
0- 500 |
0~1.6 |
Flange DN250 |
Hak Cipta © 2019 Shanghai Boqu Instrumen Co, Ltd | Seluruh hak cipta
Halo, silakan tinggalkan nama dan email Anda di sini sebelum mengobrol online sehingga kami tidak akan melewatkan pesan Anda dan menghubungi Anda dengan lancar.
